How to disinfect Morbern’s Coated Fabrics

April 2021

 

Of the multiple disinfectants listed on the CDC’s approved list the following disinfectants have been approved for use on Morbern coated fabric like Allante FRee® because they have shown to do minimal to no damage to the fabric when used appropriately.

 

  • Dilute Bleach 9:1 ratio (10%)- Liberally apply diluted bleach solution using a sponge. Rinse with cold water several times. Wipe dry. Be sure to follow guidelines on the bleach label.
  • Isopropyl Alcohol (70%)- Leave the 70% Isopropyl alcohol solution on the product for one minute. Follow with several clean water rinses before wiping dry.
  • Hydrogen Peroxide (3%)- Apply product and allow to sit for one minute. Follow this with several clean water rinses before wiping dry.

 

Other tested cleaners:

  • Bleach-rite Disinfecting Spray With Bleach
  • Clorox Commercial Solutions® Hydrogen Peroxide Cleaner Disinfectant
  • Dispatch ® Hospital Cleaner Disinfectant Towels with Bleach

 

List of Morbern patterns.

 

Important notes:

Cleaners/Disinfectants should only be used in the dilutions recommended by the manufacturer and never in concentrated form.

 

After each application, disinfectants should be thoroughly wiped off with clean water and dried with a clean towel. Any chemical residue left on a surface can cause discoloration and degradation to the surface of the fabric.

 

You can download a guide containing a full list of disinfectants appropriate for use on all our coated fabrics.

 

Check out our Cleaning and Disinfecting FAQ.

Back to NEWS & INFO
 
  PRIVACY
TERMS & CONDITIONS
SITEMAP
412 Boston Ave., PO BOX 701
Egg Harbor City, NJ 08215
800.950.3684
Email Us
Copyright 2024 Douglass Industries, Inc.
Development by Blue Mandolin Marketing
 
 
Copyright 2024 Douglass Industries, Inc.   Phone: 800-950-3684   www.dougind.com